IITC 甩尾测痛仪 ，Tail Flick Test Analgesia Meter for Mice and Rats?

型号:IITC 甩尾测痛仪
联系人:李先生
联系电话:18618101725
品牌:iitc

IITC 甩尾测痛仪 ，Tail Flick Test Analgesia Meter for Mice and Rats

在对大小鼠麻醉和非***品检测属性时能进行潜伏期和温度范围的检测. 当鼠尾甩出光束后内置的计时器会自动停止，同时数据会在液晶屏上显示出来。上部的卤素光源在一个持续的开启状态（即空闲状态）。前置的热源将产生一个面积为4X6mm的区域刺激尾部. 尾槽的内置感应器就会检测鼠尾的甩尾动作. 尾槽是由非金属制成以避免类似其他品牌类似系统的不必要的调节。如果在与编定的时间内小动物没有甩尾； t热源将自动关闭以避免组织的损伤。内置计时器的zui小可调时间为0.01秒。控制系统的方式可以通过前面板或者脚踏开关（可选）。

尾部温度测量选项 (T)

wu论什么时间段都可以进行尾部温度的测量

在每次实验开始阶段，激发温度时是自动的。预设温度（由使用者设定）暖尾后，实验开始，整个过程保证了尾温一致。

这个可选功能可以自动预加热温度高达75摄氏度，保证了实验的鲸准可控及鲸准的可重复性。一旦达到预设温度，试验和计时器都会自动启动。当动物有了甩尾反应，计时器和热源自动停止，同时显示实验数据（包括重复序列、开始温度、结束温度和测试时间）。除非重新设定温度，不然原来设定的温度将被存储，这消除了改变实验造成的温度变化。我们建议一个限位器对应一只动物。

 

本设备解决了关于“tail temperature prior to and at the end of testing”的问题。

 

参见文献: KJELL HOLE AND ARNE TJOLSEN: The Tail-Flick Formalin Test in Rodents: Changes in Skin Temperature as a Confounding Factor. Pain 53 (1993) pages. 247-254 Elsevier).

 

甩尾测痛仪特点：

• 可选测尾部温度（T）
• 鲸准可编程数字控制
• 人工切断功能
• zui小的热调节温度是0.01摄氏度
• 室温至250摄氏度
• 自动检测反应
• 可手动操作all的定时功能
• 字母数字读出
• 通过小键盘输入all功能和参数
•  


• USB和RS232标准
• 标准打印机输出
• 标准脚踏开关
• 数据采集软件（可选）
• 热敏打印机（可选）
• 软件 -USB端口 -（可选）
• 尺寸： 18" x 18"
• 两年质保
• 120/240V
• CE认证
   

  货号	描述
  33	甩尾测痛仪
  33T	甩尾测痛仪/带尾部测温
  18	高强度灯泡，每包2个
  Series8	软件

英文介绍：

Tail Flick Test Analgesia Meter for Mice and Rats

The IITC Tail Flick Test apparatus meter measures latency and/or temperature threshold when detecting properties of narcotic and strong non-narcotic drugs on mice and rats. A built-in Timer is automatically stopped when the animals’ tail flicks out of the beam of light, test result will be displayed on readout for viewing.

An overhead halogen light source is in a constant “ON” (idle state). A pre-focused heat source supplies an area of 4X6mm stimulation to the tail. A built-in sensor in the tail groove detects the tail flick of the animal. The tail groove is a non-metallic material to avoid unnecessary conditioning of your animals; unlike other systems. If the animal does not flick their tail within the pre programmed cut-off time; the heat source shuts off automatically; avoiding tissue damage. Built-in timer displays the reaction time in 0.01 second increments. Control of system can be from either the front panel or supplied footswitch: Start, Stop and Reset of tests.

Measurement of tail temperature at all times.

Trigger temperature is automatic at start of every test. Warms tail to preset temperature (set by user) and then tests start, allowing all tail temperatures to be identical.
This optional feature allows automatic preheating of the tail up to 75 degrees c., ensuring all experiment protocols to be precisely controlled and repeated. Once a preset temperature is reached, the test and timer start automatically. Once the animal reacts via tail flick the timer and heat source stop and test results are displayed. Readout will now show in repeatable sequence, start , end temperatures and test time. This unique feature stores the set temperature unless otherwise changed; eliminating temperature variations from test to test. We recommend that animals be restrained with one of the IITC restrainers.

This unit solves the problem associated with “tail temperature prior to and at the end of testing.” See article: KJELL HOLE AND ARNE TJOLSEN: The Tail-Flick Formalin Test in Rodents: Changes in Skin Temperature as a Confounding Factor. Pain 53 (1993) pages. 247-254 Elsevier).

 

Features
Tail Temperature Optional (T)
Precise programmable digital control 
Humane cut-off feature
Adjustable heat intensity in 1% increments room temperature to 250 degrees C.
Reaction is detected automatically 
Manual override of all timer functions 
Alphanumeric readout 
All Functions and parameters entered via key-pad 
Footswitch - RS232 - Printer output (standard)
Software - USB - (optional)

Dimensions:

Electronics: 18" x 18"

Two year warranty
120/240V
CE

Part #	Description
33	Tail Flick Test Analgesia Meter
33T	Tail Flick Test Analgesia Meter/Tail Temperature
18	High Intensity Bulbs, 2 per pack
Series 8	Software for Tail Flick